Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CAPROWAX P™ 6006-C65-BM42100 - Polyester-MX - Albrecht Dinkelaker

Material Data Center offers the following functions for CAPROWAX P™ 6006-C65-BM42100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Caprowax P datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
肖氏硬度D 52 - ISO 7619-1
热性能价值单位Test Standard
ISO数据
维卡软化温度, A 54 °C ISO 306
其它性能价值单位Test Standard
密度 1200 kg/m³ ISO 1183
加工推荐(挤出)价值单位Test Standard
预干燥-温度 48 - 50 °C -
预干燥-时间 12 h -
加料温度 50 - 60 °C -
1区 100 - 160 °C -
喷嘴温度 90 - 120 °C -
典型数据
加工方法
注塑, 薄膜挤出成型, 吹塑, 热成型
供货形式
粒料
Certifications
生物相容, 生物降解, 可堆肥 ISO 13432 (制造商)
应用
包装
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.